With cash being tight today, perhaps the answer to giving your car a brand new look will be to indulge in some car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it may be the ideal solution.

Its a outstanding money saver, but even more so if you do it yourself as opposed to having it professionally done. You could do it if you study the basics and follow the instructions for car spray painting. It’s fundamental though if you decide you are going to undertake this project that you are prepared to see it through till the end.

The supplies you require are :

-coverings to protect the unpainted areas and masking tape to hold these in place -a good car wash detergent and brush and also a wax/grease remover. -various grits of sandpaper -primers and paint thats urethane base for the car spray painting -paint sprayer -safety equipment like masks, goggles and protective clothing -knife and putty for fill ins.

One : You must be sure that you wash the car thoroughly to take out all grime and debris. If you do not then these things would be set in with your paint, giving a very daunting look to the completed job. Follow up with a wax/grease remover so the paint you use for the car spray painting will adhere properly.

Two : Get rid of any rough spots by sanding. Once this has been done be certain to rinse off whatever of the loose sandings. This’s where you will want to utilise the putty to fill in whatever small pit marks, that’re have been caused from stones for example.

Three : Dont get in too much of a rush to begin your car spray painting. The car must be totally dry so its best to leave it to do so for few hours. You could go ahead and cover whatsoever of the areas that your dont want to get paint on.

Four : At present you are ready to set out with the primer. Don’t skip this step, as it will give a much better look to the finished project. It helps the paint to adhere properly and provides for a more even finish. Next, once the primer is dry you’ll need to gently sand it down.

Five : You are finally at the step you have been waiting for. It’s time to apply the color for your car spray painting. Whether you have preferred to use aerosol paints or a spray gun, the premise remains the same. Only apply thin coats. A couple would probably be necessary. Numerous light coats are much better than 1 thick coat. You will be able to tell just by looking at the car how many more coats of paint it’ll require. A couple will just need two whereas several others will need 3 or 4.

6 : Ultimately, down to the last step and thats applying the clear coat. This’s done exactly the same as the colored coats.

Now you could clean up, take a step back and look up to the masterpiece youve created.

Tags: Auto

Popularity: 6% [?]