Spray paint could end up on your car several different ways. One it can be an over-spray from another area that you’re painting on the car. 2 it could be an accident that someway the spray got on it. Or you decided to spray paint the car yourself, then didnt like it or made a mistake.

How tricky a job its going to be to remove it will depend on a lot of components. First off, you need to determine the type of paint. Hopefully it’ll be a water based paint which is much easier to deal with. All you’ll most likely have to do here’s wash the region down well with soapy water. Now if it’s an oil based paint then it makes things abit more difficult. Then another dilemma will be you don’t even know what kind of paint it’s.

Firstly, there are a couple kinds of paint. It could be lacquer or acrylic. It can even be enamel but this is not as favourite as it used to be. If your particular paint on your car happens to be enamel then if the unintentional spray paint is lacquer or acrylic would make the enamel paint look wrinkled. Unluckily, the one and only solution in this case would be to scrape the region clean and then re-paint it to match the cars primary color.

If you’re fortunate enough to have an original finish of acrylic or lacquer and enamel paint has been sprayed on top of it, there won’t be any wrinkles to the basic. You want to check if the paint is enamel, so here’s what you do.

Take whatever paint thinner, kerosene, gasoline or turpentine and use a average amount to a clean white cloth. Now very lightly rub over the paint you require to take out. If you see the paint colour being transferred to the cloth, then its enamel. If the cloth stays clear then it’s acrylic or lacquer. If it did turn out to be enamel then just carry on to gently clean off the residue of the paint.

Thus if youve ended up with either lacquer or acrylic being the culprit then you’ll require to go and buy the finest grade of rubbing compound on the market for car finishes. Take a hand sized white cloth and lightly moisten it with some kerosene or turpentine. Just sufficient to wet the cloth, as it keeps the compound from caking, and makes the abrasive finer, which results in a greater finish. Patience would be the virtue here, as you must go on inspecting the region you’re working on so you don’t take out or spoil the original finish of the car. Work in small circular motions with gentle pressure. Continue checking the color of the paint on the cloth. Keep using various parts of the cloth, so your cloth remains moderately clean, and youre not simply putting the paint back on again.

The best solution is of course not to spray paint the car at all. Accidents do take place though and fortunately for this peculiar one theres a solution.

Tags: Auto

Popularity: 11% [?]